AMG Standard 5-K Style Gutter System Installation
​
A professionally installed gutter system form AMG consists of the highest quality, most durable products and components available to complete your the installation of your seamless gutter system.
​
This will include .027 aluminum 5-K style gutter, with a baked enamel factory finish (20 year manufacturers warranty)
Manufactured and fabricated at your home or business using the latest technology.
​
2 x 3 downspouts and elbows are standard but larger 3 x 4 downspouts are available at an additional cost.
All the necessary components /parts including but not limited to; end caps heavy duty hidden hangers, concealed outlets, .027 downspout straps, corners and the best quality sealant on the market. (downspout extensions will be installed as needed to replace the existing aluminum extension only)
​
All exterior fasteners will be corrosion free stainless steel with all interior fasteners being zinc-plated/stainless steel.
We also replace fascia board and other forms of wood siding or posts should the need arise.
​
Although the phrase "seamless Gutter" is commonly used throughout the industry, it is impossible to avoid seams at outlets, corners and end caps. These areas are sealed using the highest quality permanent sealer available on the market today. (this product can be used even under water)
​
THE EQUIPMENT AND
COMPONENTS OF THE GUTTER
INDUSTRY.
​
​
​
​
​
THIS IS AN EXAMPLE OF A PORTABLE
GUTTER MACHINE. IF YOUR GUTTER
CONTRACTOR DOES NOT HAVE ONE
YOU CAN EXPECT DAMAGED GUTTER
AND A FLY BY NIGHT JOB. (GUTTER
MACHINES COST LESS THAN
$10,000.00 SO THERE'S NO EXCUSE
NOT TO HAVE ONE.
​
​
​
​
THIS IS A ROLL OF .O27 ALUMINUM
GUTTER COIL. WITH A BAKED
ENAMEL PAINT FINISH AND A 20
YEAR WARRANTY. YOUR GUTTERS
WILL BE MANUFACTURED AT YOUR
SITE TO YOUR CUSTOM LENGTHS,
REDUCING WASTE AND COST
PASSING THE SAVINGS ON TO YOU.
​
​
​
​
THIS IS A VIEW OF THE K-STYLE
PROFILE. 5-K AND 6-K STYLE GUTTER
PROFILES ARE AVAILABLE IN TWO
THICKNESSES. 5-K IS PRODUCED
PRIMARILY IN .027 BUT .032 CAN BE
PURCHASED AT ADDITIONAL COST,
WITH 6-K BEING PRODUCED IN .032
ONLY.
​
​
​
​
THIS IS AN EXAMPLE OF OUR
CONCEALED HANGER. THERE ARE
MANY DIFFERENT STYLES/TYPES,
THIS BEING ONE OF THE STRONGEST
ON THE MARKET, FULLY GUSSETED
TO REDUCE SAGGING. WE PREFER
TO USE OUR OWN SCREWS TO
CONTROL THE QUALITY AND FINISH.
​
​
​
​
THIS IS AN EXAMPLE OF THE EXTERIOR
FASTENERS THAT WE USE TO ASSEMBLE
YOUR GUTTER SYSTEM. WE USE #6 3/8"
STAINLESS STEEL SCREWS DUE TO THEIR
EXTREMELY HIGH RESISTANCE TO CORROSION.
OTHER COMPANIES USE LESS EXPENSIVE POOR
QUALITY SCREWS/RIVETS THAT RUST OR COME
LOOSE. STAINLESS STEEL SCREWS COST MORE
THAN RIVETS BUT HOLD LONGER AND DO NOT RUST
MAKING THEM A BETTER CHOICE FOR OUR CUSTOMERS
GUTTER APPEARANCE.
​
​
​
​
​
THIS AN EXAMPLE OF AN END CAP.
END CAPS ARE USED TO END A RUN
OF GUTTER AND ARE CRIMPED IN
FIVE AREAS TO THE END OF THE
GUTTER AND SEALED WITH A
PERMANENT SEALER AND ARE
FACTORY PAINTED TO MATCH
YOUR NEW GUTTER SYSTEM, NOT
SPRAY PAINTED ON THE JOB-SITE.
​
HERE ARE EXAMPLES OF INSIDE AND
OUTSIDE BOX MITER CORNERS.
THERE ARE THREE DIFFERENT WAYS
TO JOIN GUTTER AT THE CORNERS:
BOX MITER, STRIP MITER, AND HAND
MITER. MATCHING PRE-PAINTED
BOX AND STRIP MITERS ARE
PREFERRED AS HAND MITERS AND
MOST STRIP MITERS HAVE TO BE
PAINTED VOIDING ALL PAINT
MANUFACTURERS WARRANTIES. "IF"
THE SPRAY PAINT MATCHES THE
GUTTER COLOR (AND THATS A BIG
IF), IT WILL FADE AT A DIFFERENT RATE
THAN THE FACTORY FINISH LEAVING YOU WITH
AN UNSIGHTLY STRIPE ON EACH CORNER.
​
​
​
​
A SEAMLESS GUTTER SYSTEM IS ONLY AS
GOOD AS THE SEALANT USED TO SEAL IT!
​
GEOCELL 2300 SERIES
SELF-LEVELING,
HIGH-PERFORMANCE TRIPOLYMER
SEALANT DESIGNED TO PREVENT
THE PASSAGE OR MOISTURE
THROUGH SMALL JOINTS AND SEAMS.
​
​
​
​
​
THIS IS AN EXAMPLE OF OUR 2-3/8 ROUND
DOWNSPOUT OUTLET USED TO ATTACH
THE DOWNSPOUT TO THE GUTTER. THIS
APPLICATION CONCEALS THE FASTENERS
THAT HOLD THE OUTLET IN PLACE AND
ELIMINATES TEARS IN THE GUTTER
REDUCING THE CHANCE OF CLOGGED
AND DAMAGED DOWNSPOUT'S.
​
​
​
​
THIS IS AN EXAMPLE OF OUR 2X3 .019
STANDARD DOWNSPOUT.
3X4 .024 (COMMERCIAL)
3X4 COMMERCIAL DOWNSPOUT'S
CAN BE INSTALLED ALONG WITH 5-K
AND 6-K INSTALLATIONS
REPRESENTING 100% INCREASE IN
WATER VOLUME DISPLACEMENT.
​
​
​
​
​
THIS IS AN EXAMPLE OF "A" AND "B"
ELBOWS WHICH ARE FABRICATED
FROM DOWNSPOUT MATERIAL AND
COME IN ALL SIZES AND
THICKNESSES. ELBOWS ARE USED TO
BRING THE DOWNSPOUT BACK TO
THE BUILDING AND TO DIRECT
WATER AWAY FROM YOUR
FOUNDATION AT THE BOTTOM.
​
​
​
​
​
THIS IS AN EXAMPLE OF A
STANDARD DIAMOND DOWNSPOUT
STRAP USED TO ATTACH THE
DOWNSPOUT TO THE BUILDING
MADE FROM THIN .019 OR LESS
ALUMINUM. WE USE HEAVY FLAT
COIL STOCK .027 THICK ALUMINUM WITH
STAINLESS STEEL SCREWS TO FASTEN
THE DOWNSPOUT TO THE BUILDING SECURELY.
​
​
​
​
​
SPLASH BLOCKS OR SOMETIMES
CALLED EROSION BLOCKS ARE
USED UNDER THE DOWNSPOUT
ELBOW OR EXTENSION TO CREATE
A BARRIER BETWEEN THE WATER
RUSHING FROM THE DOWNSPOUT
AND YOUR LANDSCAPING/PAVING
MATERIAL MINIMIZING DAMAGE
AND OR WASH OUT.
